sketch
-
Want a Logic Analyzer?? Then just get a Papilio!
https://youtu.be/pqCo8yAhLhQ Not long ago we published an article about using an Arduino UNO as a logic analyzer. As it couldn´t be otherwise, you can also do the same with a Papilio. And guess what? The Papilio-based logic analyzer is more powerful. No hype, just real numbers. You can achieve 32 channels, at 200 MHz, while…
-
New Tutorial – PWM outputs on Papilio FPGA
In this tutorial you will learn how to use the PWM outputs of your Papilio FPGA board. For this particular step-by-step article, we have connected a button LED Wing to Wing slot AL. Basically you will be able to write a sketch that uses a PWM on any pin. We have only used 6 pins…
-
Do you have an Arduino UNO? Then you have a logic analyzer!
This tutorial shows, step-by-step, how to turn your Arduino UNO into a 6 channel SUMP. This logic analyzer is able to sample signals with a speed varying between 4 MHz and 10 kHz. Best results are obtained below 1 MHz. Above this mark, there is too much of a lag between the trigger detection and…
You must be logged in to post a comment.